Short Description:
Item: DWDM EDFA 40 Channels Optical Pre-Amplifier
Connector type: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC
Carries whole C-Band 1528nm ~ 1561nm of 40 channels
Output power range: 13dB~25dBm, Input power range: -30dBm~ -12dBm
- Brand Name: Rollball
- Min.Order Quantity: 1 Piece
- Place of Origin: Shenzhen, China
- Payment Terms: Paypal, Western Union, T/T
- Certification: FCC, CE, RoHS
DWDM EDFA 40 channels Optical Pre-Amplifier
Overview
- The optical amplifier has made it possible to amplify all the wavelengths at once and without optical-electricla-optical(OEO) conversion. Optical amplifiers are an essential component in metro, regional and long haul optical networks.
- A Pre-Amplifier EDFA is a high-gain module for amplifiying low input level signals that operates at the receiving end of an optical link.
- It is designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver and thus provide improvement in the receiver sensitivity.
Features
- Carries whole C-Band 1528nm ~ 1561nm of 40 channels
- Connectors type: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC
- 19” 1RU rack enclosure
- Gain range:15dB~26dB
- Output power range: 13dB~25dBm
- Input power range: -30dBm~ -12dBm
- Support any bit rate and signal format
- Typically used at the end of the transmission link
- AGC(automatic gain control) maintains constant gain
- Support Telnet & SNMP
- Dual 220VAC/-48VDC power supply
- Compatible with Telecordia GR-1312-CORE
- Low noise figure suitable for long haul applications
- Perfect Network Interface – Ethernet, RS-485 and RS-232 port
Order Information
P/N | Description |
RB-EDFA-PA-XX | 13~25dB output power, DWDM EDFA 40 channels Optical Pre-Amplifier, LC/SC/FC/ST optional |